WARD CARE

1006-Wardcare bedside locker-NH (SS Top)
Approx. size: 400 mm square. Height: 820 mm.

• Locker made from machine pressed CRCA steel sheets enclosed on three sides, having one box and one drawer with imported slide.
• Fitted with superimposed SS top with raised edge on three sides.
• Mounted on four swivel, twin wheel non rusting castors, 50 mm dia.
• Buffers at rear.
• Pretreated and powder coated.

1012-Wardcare adjustable bedside table
Approx. size: Top 810 mm (L) x 352 mm (W).

• Two section laminated top.
• MS tubular telescopic stem with geared SS handle for height adjustment from approx. 760 mm to 1050 mm.
• MS rectangular tubular base frame mounted on four twin wheel non rusting castors, 50 mm dia.
• Pretreated and powder coated.

1001-Wardcare bedside locker (SS Top)
Approx. size: 400 mm square. Height: 820 mm.

• Machine pressed CRCA steel sheet locker box with door.
• Superimposed SS top with raised edge on three sides.
• MS tubular legs with rubber feet.
• Pretreated and powder coated.

1012-A Wardcare adjustable bedside table
Approx. size: 400 mm square. Height: 820 mm.

All specifications same as 1012 but height from 800 mm to 1050 mm adjusted by hand operated gas spring.

1051-Wardcare bedside screen (Three fold)
Overall approx. size: 1680 mm (H) x 2450 mm (W).

• MS tubular construction in three sections mounted on six swivel, twin wheel non rusting castors, 500mm dia.
• Middle span 1210 mm wide.
• Side spans 610 mm wide each.
• Supplied with hooks and springs without curtains.
• Pretreated and powder coated. Supplied in kdc.

1033-Wardcare invalid wheelchair
Overall approx. size: 670 mm (W) x 1120 mmD x 920 mmH.

• MS tubular framework fitted with metal seat and back.
• Adjustable aluminium foot rests.
• Two solid rubber tyred bicycle wheels with brakes and self propelling SS hoops.
• Two swivel castors, 200 mm dia. in front.
• Pretreated and powder coated. Supplied in kdc.

1044-Wardcare saline stand

• Strong MS tubular construction mounted on five prolonged rectangular tubular base, fitted with five swivel, twin wheel non rusting castors, 50 mm dia.
• SS rod with double hooks. Height adjustable from approx. 1620 mm to 2340 mm.
• Pretreated and powder coated.

1069-Wardcare cylinder trolley (Push type)

• Suitable for 1320 ltrs. size gas cylinder.
• MS tubular framework fitted with two wheels, 100 mm dia.
• Trolley with SS base.
• Pretreated and powder coated.

1011-Wardcare overbed table
Overall approx. size: 1120 mm (L) x 450 mm(W) x 920 mm(H).

• MS tubular framework mounted on four twin wheel, non rusting castors, 50 mm dia. Top 760 mm (L) x 450 mm (W) made of laminated board.
• Pretreated and powder coated. Supplied in kdc.